​​Industrial Servo Motor Mitsubishi HG-SN202BJ-S100 2000 r/min 9.6A

Mitsubishi Servo Motor HF-SN202BJ-S100

• Extended Product Type : Moters

• Product ID : HF-SN202BJ-S100

• Mitsubishi Type Designation : Moters

• Output [kW] : Flange mounting

• Moment of inertia J [× 10-4 kg•m2] : 47.9

• Mass [kg] : 18

Specifications

• HG-SN202BJ-S100 performance parameter description
• Continuous characteristics (Note 1) Rated output 2kW, rated torque 9.55 N·m
• Maximum torque] 28.6 N·m
• Rated speed (Note 1) 2000 r/min
• Maximum speed 3000 r/min
• Instantaneous allowable speed 3450 r/min
• Power ratio at continuous rated torque 16.1 kW/s
• rated current 9.6A
• Maximum current 31A
• Inertia J 56.5 *10 4th power kg·m square
• Recommended load inertia ratio (Note 2) 15 times or less
• Speed·Position Detector Incremental 17-bit encoder (resolution of servo motor per revolution: 131072pulses/rev)
• Oil seal Yes
• heat resistance rating] 130 (B)
• Structure Full-closed self-cooling (Protection class: IP65 (Note 3))
• Environmental conditions (Note 4)
• Ambient temperature: 0°C~40°C during operation (no freezing), -15°C~70°C during storage (no freezing)
• Ambient humidity: 80% RH or less (no condensation) during operation, 90% RH or less during storage (no condensation)
• Surrounding environment: indoor (no direct sunlight), no corrosive gas, flammable gas, oil mist, dust, etc.
• Altitude: below 1000m above sea level
• Vibration resistance (Note 5): X: 24.5 m/s square Y: 49 m/s square
• Vibration level (Note 6)] V10
• Available load of the shaft (Note 7) L 79mm, radial 2058N, axial 980N
• Weight] 17kg

Similer item we can supply: