| Brand: | MITSUBISHI |
|---|
| Condition: | New with factory packaging |
|---|
| Model: | A1SY40P |
|---|
| Shipping Weight: | 1.55 lbs |
|---|
| Shipping Dimensions: | 6.25 x 4.75 x 1.75 in |
|---|
| SKU: | D953793 (KEI04-C) |
|---|
| Category: | Output Modules |
|---|
A1SI61 is designed specifically for mechanical device control
applications that require high-speed response time.
A1SI61 temporarily stops the running sequence control program when
an interrupt signal is generated,
And execute the corresponding interrupt processing program
Mitsubishi A1SY40P according to the interrupt vector.
The interruption starting conditions can be selected using internal
switches based on the type of connected equipment,
You can choose either the rising edge of the interrupt signal as
the interrupt start or the falling edge of the interrupt signal as
the interrupt start A1SY40P
The promotion and application of PLC programming have achieved
rapid development in China,
It has been widely used in various mechanical equipment and
electrical control devices in production processes,
Various industries have also emerged with a large number of
achievements in using PLC to transform equipment.
Understand the working principle of PLC and have the ability to
design, debug, and maintain PLC control systems,
Mitsubishi A1SY40P has become a basic requirement for electrical
technicians and engineering students in modern industry.
Instruction list programming language is a mnemonic programming
language similar to assembly language,
Like assembly language, it consists of opcodes and operands.
In the absence of a computer, it is suitable to use a PLC handheld
programmer to program user programs.
At the same time, the instruction table programming language
corresponds one-to-one with the ladder diagram programming language
diagram,
Under PLC programming software, Mitsubishi A1SY40P can be converted
to each other. Figure 3 is the instruction table corresponding to
the PLC ladder diagram in Figure 2.
The characteristic of instruction table programming languages is
the use of mnemonics to represent operational functions,
Easy to remember and master;
Using mnemonics on the keyboard of a handheld programmer is easy to
operate and can be programmed and designed in situations without a
computer:
There is a one-to-one correspondence with the ladder diagram. Its
characteristics are basically consistent with the ladder diagram
language. I/O control method: refresh mode or direct mode
Mitsubishi output mode
Block.
User program storage capacity: 14K steps.
I/O points: 512 points.
Memory capacity: 64K bytes.
ANSCPUs have been updated to ANSHCPU, which has the following
advantages.
16 bit dedicated microprocessor.
Large capacity battery backup memory RAM.
Expanded the control capability of I/O points.
Dedicated CC Link instructions.
Expand the capacity of annotation storage.
PLC programming is an electronic system for digital operations,
Mitsubishi output modules are designed specifically for use in
industrial environments.
It uses programmable memory,
Used to store instructions for performing logical operations,
sequential control, timing, counting, and arithmetic operations
within it,
And control various types of mechanical or production process
Mitsubishi output modules through digital and analog inputs and
outputs.
Programmable controllers and related devices,
The design should be based on the principle of easy integration of
industrial control systems and easy expansion of their functions.
Capable of continuous thermocouple or platinum temperature
measurement.
In addition, the temperature measurement range can be set to match
the usage temperature.
The time required for instruction execution is closely related to
the length of the user program, the type of instruction, and the
CPU execution speed,
Generally speaking, during a scanning process, the fault diagnosis
time is,
The communication time, input sampling, and output refresh take up
less time,
The execution time accounts for the majority.
The response time of PLLC refers to the interval between the time
when the external output signal of the PLC changes and the time
when it controls the change of the external output signal
Septum,
It is called lag time, which is determined by the input circuit
time constant,
The time constant of the output circuit, the arrangement of user
statements, and the use of instructions,
The PLC's cyclic scanning method and the PLC's refresh method for
I/O constitute Mitsubishi A1SY40PA1SY40P.
This phenomenon is called the I/O delay time effect.Our advantage Products:
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
(Modicon,SMC,SICK,NORGREN,Siemens etc.)
Linture Technology Co,. Ltd
Contact person: Vivian
E-mail: linture0319@163.com
Cellphone: +0086-18026552038
Wechat:18026552038
WhatsApp:+86 18026552038
Tag:electric servo drive,
ac servo drive,
ac servo pack
