Detailed data :

HF-KN73J-S100 Mitsubishi 750w power AC servo control motor

Electricity: HA-SH type.

Power: 0.5kw.

Speed: 3000r/min

Speed regulating motors can be divided into stepless constant speed motors, stepless constant speed motors, stepless variable speed motors, and stepless variable speed motors,

It can also be divided into electromagnetic speed regulating motors, DC speed regulating motors, PWM variable frequency speed regulating motors, and switched reluctance speed regulating motor servo motor drivers.

The rotor speed of an asynchronous motor is always slightly lower than the synchronous speed of the rotating collision field,

The rotor speed of a synchronous motor is independent of the load size and always maintains synchronous speed. HF-KN73J-S100 motor series: low inertia, small capacity

Servo motor driver.

Use a serial absolute/incremental encoder.

Rated output power: 0.6kw,

Rated speed: 3000rpm.

With or without brake: with.

Shaft end: straight shaft.

The functional difference between AC servo motors and brushless DC servo motors is that AC servo motors are better because they are controlled by sine waves and have less torque ripple

DC servo is a trapezoidal wave. But DC servo is relatively simple and cheap. Motor series: medium inertia, medium power servo motor driver.

Rated output power: 3.5kw.

Rated speed: 3000r/min,

With or without brakes: Not equipped.

Shaft end: Standard (straight shaft).

Protection level: IP65 (IP67)

Features: Three modes of medium inertia, from low speed to high speed, are available for selection, suitable for different application ranges.

Application examples: conveyor machinery, robots, X-Y workstations,

High resolution encoder 131072p/rev (17 bit) Mitsubishi HF-KN73J-S100

Equipped with a high-resolution encoder, it ensures excellent performance and stability at low speeds,

All motor sizes are the same as previous products and wiring is compatible. Motor series: medium inertia, medium power,

Rated output power: 2.0kw.

Rated speed: 3000r/min

Equipped with brakes: included.

Shaft end: Standard (straight shaft).

Protection level: IP65 (IP67)

Features: Three modes of medium inertia from low speed to high speed are available for selection, suitable for different application ranges of Sanfang HF-KN73J-S100

Application examples: conveyor machinery, robots, X-Y workstations,

High resolution encoder 131072p/rev (17 bit).

Equipped with a high-resolution encoder to ensure excellent performance and stability at low speeds

All motors have the same size as previous products and are compatible with Mitsubishi HF-KN73J-S100 wiring. Motor series: ultra-low inertia, medium power.

Rated output power: 1.0kw.

Rated speed: 3000r/min.

Equipped with brakes: included.

Shaft end: Standard (straight shaft).

Protection level: IP65 (IP67).

Feature: Ultra low inertia suitable for high rate operations.

Application example: Ultra high frequency transmission machinery.

High resolution encoder 131072p/rev (17 bit).

The built-in high-resolution encoder ensures excellent performance and stability at low speeds.

All motors have the same size as previous products and are compatible with wiring. Motor series: low inertia, small to medium capacity,

Use a serial absolute/incremental encoder.

Rated output power: 5.0kw.

Rated speed: 2000rpm.

With or without brake: with.

Shaft end: straight shaft.

Comparison between servo motors and single-phase asynchronous motors.

The working principle of AC servo motors is similar to that of split phase single-phase asynchronous motors,

But the rotor resistance of the former is much greater than that of the latter,

So compared to single asynchronous motors, servo motors

There are three significant characteristics:

1. High starting torque HF-KN73J-S100

2. The operating range is wide.

3. Servo motor driver without self rotation phenomenon,

The AC servo motor runs smoothly and has low noise,

But the control characteristics are nonlinear, and due to high resistance, high losses, and low efficiency,

Therefore, compared to DC servo motors of the same capacity, they are larger in size and heavier in weight,

So it is only suitable for small power control systems of 0.5-100W.

Huizhou Linture Technology CO.,LTD

Our company locats at the central of China,huizhou , Guangdong Province. With rapid development, LINTURE serves fields of automation in global markets, Our business
covers five continents throughout the world with the basic conviction of honest, the international management of customer-centered concept and purpose of bringing convenience to customers. We have confidence to bring our customers more substantial profit with high-quality service and reasonable prices. Choosing us,you will choose a sincere friend and reliable partner. Please feel free to contact us if you are a global manufacturer of high quality brand products who desires to enter the Chinese market or who searches for a Chinese agent.We would like to create a brilliant future with friends in domestic and overseas. All goods sold have one year warranty.

The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.